加载用英语怎么说

　　加载字面意思是增加装载量。现多用于计算机相关领域，表示启动程序时文件或信息的载入。那么你知道加载用英语怎么说吗?下面来学习一下吧。

　　加载英语说法1：

　　load

　　加载英语说法2：

　　load-on

　　加载的相关短语：

　　斜坡加载 Ramp Load ; Ramped Loading

　　正在加载 loading

　　加载函数 Loading function ; load function

　　塑性加载 Plastic loading

　　加载选项 Load Options

　　加载电缆 Loading Cable

　　预先加载 preload ; pre-loaded ; eager loading

　　均匀加载 uniform loading ; continuous load ; load continuously

　　加载平衡 load balance

　　加载的英语例句：

　　1. Sometimes charged cursor programs forget to change the appearance of the cursor.

　　有时使用加载光标的程序忘记改变光标的外观.

　　2. The middle core was loaded.

　　中间那块岩芯曾加载.

　　3. The head load time is: 35 ms.

　　磁头加载时间: 35毫秒.

　　4. A charged cursor also demands good cancel idioms. Otherwise, how do you harmlessly discharge the cursor?

　　加载的光标也要有合适的取消操作习惯用法, 否则你如何安全地取消光标的加载状态 呢 ?

　　5. There are two basic variants of palette tool behavior: modal tools and charged cursor tools.

　　它们的行为有两种基本类型,即模态工具和加载的光标工具.

　　6. A replica technique is used to record the scratch patterns before and after loading.

　　可采用一种复制技术把在加载前后的划痕图案记录下来.

　　7. The simplest imposed conditions are those in which the loading is periodically and uniformly repeated.

　　最简单的加载情况是周期地、均匀而重复地施加的载荷.

　　8. The unloading curve normally falls below the loading curve to form a hysteresis loop.

　　卸载曲线通常都落在加载曲线之下,形成一个滞后回线.

　　9. In many open - loop machines, there is single - valued relationship between loading rate and stiffness during dynamic testing.

　　许多开路机器在动态试验时,加载速度和刚度之间只有单值关系.

　　10. Loading was achieved through a battery of hydraulic jacks acting on a rigid metallic distribution plate.

　　通过作用于刚性金属垫板上的一组液压千斤顶加载.

　　11. The elements of the load vector, { P } , are the load components tabulated in numerical sequence.

　　加载向量P的元素是按编号顺序列表的加载分量.

　　12. Appreciable differences may occur, however, when small deformations considerably alter the loading conditions.

　　当微量变形能使加载条件发生颇大改变时,就会产生颇大的差异.

　　13. If the structure is elastic the force - displacement curve follows the same path on loading and unloading.

　　如果该结构为弹性者,那么在加载和卸载时力位移曲线遵循相同的迹线.

　　14. High - strength bolts were inserted into the holes and tightened to a high preload level.

　　把高强度螺栓插入孔洞,同时拧紧螺栓达到高的预加载水平.

　　15. Key removable in locked position only. Spring loaded clip - in pawl.

　　只能在锁住位置时取出钥匙, 弹簧加载的嵌入式掣子.